In some challenging wireless environments, specifically those where you do not have 100% coverage, and especially those with a lot of concrete, leaded glass and other RF challenges – 5Ghz can be problematic. Some devices just love to hold on to 5Ghz connections even if the 2.4Ghz signal is better. On your Meraki dashboard, it … Continue reading Cisco Meraki: How to set a wireless network to 2.4Ghz only?
Tag: Cisco Meraki
Tricks: Introducing Cisco RF Planning Tool
Here is a useful planning tool in Wireless Network provisioning for Cisco Meraki AP or the Mobility Express models. This is an online tool called Cisco RF Wi-Fi Planner Tool. Check out https://rftool.cisco.com You can use this by logging in to your Cisco Account. You can put into account external factors in designing your wireless network … Continue reading Tricks: Introducing Cisco RF Planning Tool
Issue: Android users cannot connect to Wireless on Cisco Meraki APs
This article is to be used as a short reference guide on how to manually set up a WPA2-Enterprise with RADIUS Authentication (IEEE 802.1X) wireless profile on Android devices. This profile will allow the client devices to connect to the SSIDs configured with WPA2-Enterprise with 802.1X authentication as the association requirement. 1. At the home page, navigate … Continue reading Issue: Android users cannot connect to Wireless on Cisco Meraki APs
#WCry Wannacry Security Recommendations
Outbreak Date: 13 May 2017 - (Ransomware) WannaCry I know its bit old, and (almost?) quiet (perhaps, evolving) after the "kill switch" was triggered up. But here are my compiled Security Recommendations from various Firewall Vendors on mitigating the risks and protecting your network from the threats brought about by this ransomware known as WannaCry. Yesterday, another … Continue reading #WCry Wannacry Security Recommendations